Filter
Top Products
77
More on Shooting
Camera Settings that Cannot Be Applied Simultaneously
Some shooting settings cannot be used with other functions.
Restricted function
Setting Description
Flash mode
Continuous
(A58)
When Continuous, BSS, or Multi-shot 16 is
selected, flash is disabled.
Blink proof
(A76)
When On is selected, Blink proof is disabled.
Self-timer
Subject tracking
(A55)
When the touch shooting is set to Subject
tracking, self-timer is disabled.
Image mode
Continuous
(A58)
When Multi-shot 16 is selected, the Image
mode setting is fixed at L (image size: 2560 ×
1920 pixels).
ISO sensitivity
(A57)
When 3200 or 6400 is selected for ISO
sensitivity, the image mode setting of only M
2048×1536, N 1024×768, or O 640×480 can
be selected. If any image mode setting other
than above is selected, the image mode setting is
automatically changed to M 2048×1536 when
ISO sensitivity is set to 3200 or 6400.
Macro mode
Subject tracking
(A55)
When the touch shooting is set to Subject
tracking, macro mode is disabled.
ISO sensitivity
Continuous
(A58)
When Multi-shot 16 is selected, the ISO
sensitivity setting is automatically specified
according to the brightness.
Continuous
Self-timer (A 37)
When taking a picture using the self-timer, the
continuous setting is fixed to Single.
Touch shutter
(A41)
When using the touch shutter function, one
picture is taken each time the monitor is tapped.
Blink warning
Continuous
(A58)
When taking a picture using Continuous, BSS,
or Multi-shot 16, Blink warning is disabled.
Date imprint
Continuous
(A58)
When taking a picture using Continuous or BSS,
shooting date cannot be imprinted on the
picture.
Blink proof
(A76)
When On is selected, Date imprint is disabled.
Vibration
reduction
(A150)
When On (hybrid) is selected, Date imprint is
disabled.