Filter
Top Products
163
Using the projector
Using the projector
Displaying Pictures with the Projector (Projector Mode)
The COOLPIX S1100pj is equipped with a
built-in projector. The ability to project
pictures and movies with simple operation
makes for a convenient way of enjoying
photos at gatherings of family and friends.
Projecting Pictures
1 Place the camera.
Place the camera on a stable and level surface such as a table.
Point the projector window at a screen (available commercially) or flat white surface.
The projection distance between the camera and screen should be approximately
26 cm (10 in.) to 2.4 m (7 ft. 10 in.) (A 165).
2 Turn on the camera and press the P
button.
The camera enters projector mode and a
picture stored in the internal memory or on a
memory card inserted into the camera is
projected in full-frame playback mode.
The camera can also be switched to projector
mode by pressing the P button on the remote control. The camera’s monitor turns off
when the remote control is in operation. Tap the monitor to reactivate it and enable the
camera’s touch operation (A166).
3 Adjust the camera position.
To change the projected picture size, adjust the distance between the camera and
screen.
Adjust the projection angle to reduce picture distortion.
4 Adjust focus for the projected
picture.
Turn off unnecessary lights.
Rotate the projector focus dial to adjust picture
focus.