Nikon S2600 Camcorder User Manual


 
Maximizing Camera Life and Performance
F5
Technical Notes and Index
Charging AC Adapter
The Charging AC Adapter EH-69P is for use only with compatible devices. Do not use with another
make or model of device.
The EH-69P is compatible with AC 100-240 V, 50/60 Hz electrical outlets. When using in other
countries, use a plug adapter (available commercially) as necessary. For more information about
plug adapters, consult your travel agency.
Do not, under any circumstances, use another make or model of AC adapter other than Charging
AC Adapter EH-69P or USB-AC adapter. Failure to observe this precaution could result in
overheating or in damage to the camera.
Memory Cards
Use only Secure Digital memory cards. See “Approved Memory Cards” (A19) for more
information about memory cards.
Be sure to follow the precautions described in the documentation included with the memory
card.
Do not put labels or stickers on memory cards.
When you use memory cards that have been used with other devices for the first time, be sure to
format them with this camera. We recommend formatting new memory cards with this camera
before using them with this camera.
Note that formatting permanently deletes all images and other data on the memory card. Be
sure to make copies of any images you wish to keep before formatting the memory card.
If the message Card is not formatted. Format card? is displayed when the camera is turned on,
the memory card must be formatted. If there is data that you do not want to delete, select No.
Copy the necessary date to a computer, etc. If you want to format the card, select Yes. The
confirmation dialog will be displayed. To start formatting, press the k button.
Do not perform the following during formatting, while data is being written to or deleted from the
memory card, or during data transfer to a computer. Failure to observe this precaution could result
in the loss of data or in damage to the camera or memory card:
- Open the battery-chamber/memory card slot cover to remove/insert the battery or memory
card.
-Turn off the camera.
- Disconnect the AC adapter.
Do not format the memory card using a computer.