Filter
Top Products
Troubleshooting
F10
Technical Notes and Index
Camera cannot focus.
• The subject is too close to the camera. Try
shooting using macro mode, or Scene auto
selector or Close-up scene mode.
• The intended subject is one with which
autofocus does not perform well.
• Select Auto for AF assist in the set up
menu.
• Turn camera off and then on again.
39, 43, 53
29
83, E58
21
Images are blurred.
• Use flash.
• Increase the ISO sensitivity value.
• Enable electronic vibration reduction or
motion detection.
• Use BSS.
• Use tripod and self-timer.
50
37, E28
83, E56,
E57
37, 43,
E26
52
Streaks of light or partial
discoloration are visible in
the monitor.
Smear occurs when extremely bright light
strikes the image sensor. When shooting with
Continuous set to Multi-shot 16 and when
recording movies, avoiding bright objects, such
as the sun, reflections of the sun, and electric
lights is recommended.
E27,
F3
Bright specks appear in
images captured with flash.
Flash is reflecting off particles in air. Set the flash
mode setting to W (Off).
51
Flash does not fire.
• The flash mode is set to W (Off).
• Some scene modes with which the flash
does not function is selected.
• On is selected for Blink proof in smart
portrait menu.
• Another function that restricts flash is
enabled.
51
55
48
59
Optical zoom cannot be
used.
Optical zoom cannot be used while recording
movies.
75
Problem Cause/Solution A