Filter
Top Products
92 Technical Notes
Attaching Converter Lenses
The optional WC-E67 wide-angle and TC-E3ED telephoto converter lenses
attach as described below (the illustrations show the WC-E67). See the con-
verter instruction manual for details.
Rotate the mode dial to P, S, A, M, or T when using optional converter lenses. To
remove the converter, turn the camera off and perform steps 1–4 in reverse
order. Set the Converter option in the camera shooting menu (B 79) to None
when no converter is attached.
1
Remove the lens ring
Turn the camera off and remove the lens ring as
shown at right.
2
Remove the rear cap from the converter lens
3
Attach the UR-E20 adapter ring
Attach the UR-E20 to the camera lens as shown
at right.
4
Attach the converter lens
Screw the converter lens into the UR-E20 as
shown at right.
5
Choose a Converter option
Rotate the mode dial to P, S, A, M, or T and select the appropriate setting for
the Converter option in the camera shooting menu (B 79).
6
Remove the lens cap
Remove the front cap from the converter lens.