Filter
Top Products
14 First Steps
Inserting Memory Cards
Pictures are stored in the camera’s internal memory (approximately 21MB) or on
removable Secure Digital (SD) memory cards (B 91). Internal memory is used
for recording, playback, and deletion only if no memory card is inserted.
To insert a memory card:
A Memory Cards
•Use only Secure Digital (SD) memory cards.
• Memory cards that have been formatted in a computer or other device must be refor-
matted in the camera before they can be used for recording or playback (B 15, 88).
• Turn the power off before inserting or removing memory cards. Do not open the bat-
tery-chamber/memory card slot cover, turn the camera off, or remove or disconnect the
power source during formatting or while data are being recorded, deleted, or copied to a
computer. Failure to observe these precautions could result in loss of data or in damage
to the camera or card.
• Do not disassemble or modify.
• Do not bend, drop, or subject to strong physical shocks.
• Do not touch the card terminals with your fingers or metal objects.
• Do not affix labels or stickers to memory cards.
• Do not leave in direct sunlight, closed vehicles, or areas exposed to high temperatures.
• Do not expose to high levels of humidity or to corrosive gas.
1
Turn the camera off
If the power-on lamp is lit, press the power
switch to turn the camera off.
2
Insert the memory card
Open the battery-chamber/memory card slot
cover and slide the memory card in until it clicks
into place. Close the cover.
D Inserting Memory Cards
Be sure the card is in the correct orientation. Inserting
the card upside down or backwards could damage the
camera or card.