Filter
Top Products
Menu Guide 79
This option is for use with the optional converter lenses listed below. Note that
these accessories require a lens adapter ring (available separately); for more
information, see page 92 of this manual or the documentation provided with
the converter lens.
At settings other than None, a converter icon appears in the display.
e Converter
Option Description
4
None
(default)
No modifications made to camera settings. Use when no converter lens is
attached (be sure to remove lens adapter ring).
g
Wide-angle
converter
Use with WC-E67 wide-angle converter.
Camera zooms to widest angle; menu
shown at right is displayed. Choose from:
• Distortion control on (default): Correct for
pin-cushion and barrel distortion. Con-
tinuous set to Single (B 73); BSS and
bracketing can not be used (B 75).
Note: Distortion control reduces the area visible in the final picture.
• Distortion control off: No distortion correction performed.
Zoom can be adjusted manually while Wide-angle converter is in effect;
note, however, that best results will be achieved with camera zoomed out.
Focal length at widest angle is 24mm (35-mm format equivalent, distor-
tion control off).
f
Telephoto
converter
Use with TC-E3ED telephoto converter. Camera will zoom all the way in;
optical zoom is restricted to positions near maximum zoom. Focal length
at maximum zoom is 378mm (35-mm format equivalent). Focus mode
can not be adjusted.
A Converter
Be sure to select the appropriate option when using a converter lens. Select None when
no converter lens is attached. At settings other than None, the built-in flash and AF-assist
illuminator turn off, Continuous flash (B 73) can not be used. Optional flash units can
still be used, although the converter may cast shadows in pictures taken with the SB-400,
SB-600, or SB-800 (B 93; a wide panel is recommended when shooting with the SB-600 or
SB-800). Check pictures in the monitor after shooting.