Filter
Top Products
10 First Steps
Inserting the Battery
After charging the battery, insert it as described below.
D Batteries
Read and follow the warnings and cautions on pages ii–iii and 95 of this manual. The cam-
era can be used with EN-EL5 batteries only; do not, under any circumstances, attempt to
use other types. If desired, the optional EH-62A AC adapter kit can be used to power the
camera for extended periods (B 90). Do not, under any circumstances, use another make
or model of AC adapter. Failure to observe this precaution could result in overheating or in
damage to the camera.
1
Open the battery-chamber/memory card slot
cover
2
Insert the battery
Insert the battery in the orientation shown in the
label inside the battery chamber. The orange
battery latch is pushed aside as the battery is
inserted. The battery is fully inserted when the
latch clicks back into place.
D Inserting the Battery
Inserting the battery upside down or backwards could
damage the camera. Check to be sure the battery is in
the correct orientation.
3
Close the battery-chamber/memory card slot
cover
Battery latch