Northern Industrial Tools P5000 Digital Camera User Manual


 
Technical Notes 97
Error Messages
The following table lists the error messages and other warnings that appear in
the monitor and how to deal with them.
Display Problem Solution
B
w (blinks) Clock not set. Set clock. 84–85
J Battery running low. Prepare to charge or change battery. 9, 10
N Warning! Battery
exhausted.
Battery exhausted. Charge or exchange battery. 9, 10
Fz
(z blinks red)
Camera can not focus.
Use focus lock to focus on another
subject at same distance, then
recompose picture.
20, 77
O War ni ng !!
Please wait for the camera to
finish recording.
o
Other operations can
not be performed until
recording is complete.
Message clears from display auto-
matically when recording is com-
plete.
N Memory card is
write protected.
Write-protect switch is
in “lock” position.
Slide write-protect switch to “write”
position.
15
O This card cannot
be used.
Error accessing mem-
ory card.
•Use approved card.
Check that connectors are clean.
• Confirm that memory card is cor-
rectly inserted.
91
14
O War nin g!
This card cannot be read.
O Card is not formatted.
No
Format
Memory card has not
been formatted for use
in camera.
Highlight Format and press B to
format card, or turn camera off and
replace card.
15
N Out of memory.
Internal memory or
memory card is full.
Lower image quality or size.
Delete files.
Insert new memory card.
Remove memory card and use
internal memory
66
52, 81
14
15
O Image cannot be
saved.
Error occurred while
recording picture.
Format internal memory or mem-
ory card.
88
Camera has run out of
file numbers.
Insert new memory card.
•Select Reset all after either insert-
ing memory card or formatting
internal memory or memory card.
14
14,
88, 89
Cannot create cropped,
D-lighting, or small copy.
Select picture that supports crop, D-
lighting, or small picture.
44
Picture can not be used
for welcome screen.
Minimum size is 640×480. Pictures
taken at h
or 9 can not be used.
Cannot copy picture. Delete pictures from destination. 81
O Sound file can
not be saved.
Camera has run out of
file numbers.
Select Reset all after either insert-
ing memory card or formatting
internal memory or memory card.
14,
88, 89