Olympus 7000 Digital Camera User Manual


 
26 EN
Adjusting to a natural color scheme [WB]
B
CAMERA MENU X WB
: K s I A
Submenu 2 Application
AUTO
The camera automatically adjusts
the white balance according to the
shooting conditions.
5
For shooting outdoors under a clear
sky
3
For shooting outdoors under a
cloudy sky
1
For shooting under tungsten lighting
w
For shooting under daylight
uorescent lighting (household
lighting, etc.)
x
For shooting under neutral
uorescent lighting (desk lamps, etc.)
y
For shooting under white uorescent
lighting (of ces, etc.)
Selecting the ISO sensitivity [ISO]
B
CAMERA MENU X ISO
: K
Although lower ISO values reduce sensitivity,
sharp images can be taken under fully lit
conditions. Larger values increase sensitivity
so that images can be taken at fast shutter
speeds even under dimly lit conditions.
However, high sensitivity introduces electronic
noise into the resulting picture, which may give
it a grainy appearance.
Submenu 2 Application
AUTO
The camera automatically adjusts the
sensitivity according to the shooting
conditions.
HIGH ISO AUTO
The camera uses a higher sensitivity
compared to [AUTO] to minimize blur
caused by a moving subject or by
camera shake.
64/100/200/400/
800/1600
Set ISO sensitivity to a numerical
value.
Shooting pictures sequentially while the
shutter button is held down [DRIVE]
B
CAMERA MENU X DRIVE
: K s
Submenu 2 Application
o
One frame is shot each time the
shutter button is pressed.
j
*1
Take sequential shots using the focus
and brightness (exposure and white
balance) set in the rst frame.
c
The camera takes sequential shots at
a faster speed than in [j].
d
The camera takes sequential shots at
approximately 11 frames/sec.
*1
The shooting speed varies depending on the settings
for [A IMAGE QUALITY] (p. 25).
When set to [j], the ash (p.19) cannot be
set to [REDEYE]. In addition, when set to [c],
the ash is limited to either # or $. When set
to [d], the ash is xed to $.
When set to [c] or [d], [IMAGE SIZE] is
limited to [I] or lower, and [ISO] is xed to
[AUTO]. Moreover, [FINE ZOOM] (p. 26) and
[DIGITAL ZOOM] (p. 27) are not available.
When set to [j], [c], or [d], [R] (sound
recording) (p. 27) is not available.
Shooting at higher magni cations than
optical zoom without reducing the image
quality [FINE ZOOM]
B
CAMERA MENU X FINE ZOOM
: K s I
Submenu 2 Application
OFF
Only optical zoom is used to zoom in
for shooting.
ON
Optical zoom and image cropping
are combined to zoom in for shooting
(Approx. 43× (max.)).
This function will not reduce image quality
because it does not convert images with fewer
pixels into images with more pixels by adding
pixels to a cropped image.
When set to [ON], [IMAGE SIZE] is limited to
[H] or lower.
This setting is not available when [DIGITAL
ZOOM] is set to [ON].
This function is not available when [% SUPER
MACRO] (p. 20) is selected.