Filter
Top Products
39EN
Refer to “Using the Menu” (p. 3) when adjusting the settings of these functions.
Resetting the fi le names of pictures
[FILE NAME]
E
SETUP X FILE NAME
Month: 1 to C
(A=October,
B=November,
C=December)
Day: 01 to 31
Pmdd
Folder name Folder name File name
DCIM
100OLYMP
999OLYMP
Pmdd0001.jpg
Pmdd9999.jpg
Automatic
numbering
Automatic
numbering
Submenu 2 Application
RESET
This resets the sequential number
for the folder name and fi le name
whenever a new card is inserted.
*1
This is useful when grouping images
on separate cards.
AUTO
Even when a new card is inserted,
this continues the numbering for
the folder name and fi le name from
the previous card. This is useful for
managing all image folder names and
fi les names with sequential numbers.
*1
The number for the folder name is reset to 100, and the
one for the fi le name is reset to 0001.
Adjusting the CCD and adjusting the
image processing function
[PIXEL MAPPING]
E
SETUP X PIXEL MAPPING
This function has already been adjusted at
factory shipping, and no adjustment is needed
right after purchase. Approximately once a
year is recommended.
For best results, wait at least one minute after
taking or viewing pictures before performing
pixel mapping. If the camera is turned off
during pixel mapping, be sure to perform it
again.
To adjust the CCD and the image
processing function
Press the E button when [START] (submenu
2) is displayed.
The camera checks and adjusts the CCD and the
image processing function at the same time.
●