Filter
Top Products
30 EN
Taking pictures with
[COMBINE IN CAMERA 1]
1 Press the shutter button to take the fi rst
frame.
2 Move the camera slightly in the direction of
the second frame.
SAVE
OK
MENU
CANCEL
Target mark
Pointer
Screen when combining
images from left to right
3 Move the camera slowly while keeping it
straight, and stop the camera where the
pointer and target mark overlap.
The camera releases the shutter automatically.
SAVE
OK
MENU
CANCEL
To combine only two pictures, press the
E button before taking a third frame.
4 Repeat Step 3 to take a third frame.
After the third frame is taken, the camera
automatically processes the frames and the
combined panorama image is displayed.
To exit the panorama function without saving
an image, press the m button.
If the shutter does not automatically release,
try [COMBINE IN CAMERA 2] or [COMBINE IN
PC].
●
●
Taking pictures with
[COMBINE IN CAMERA 2]
1 Use NO to specify at which edge the next
picture is to be connected.
MENU
CANCEL
Direction for
combining the
next frame
2 Press the shutter button to take the fi rst
frame.
A guide frame appears as a reference.
1st frame
MENU
CANCEL
MENU
CANCEL
Guide frame
Joint area
3 Compose the next shot so that the
joint area overlaps the guide frame.
Composition of the 2nd frame
OK
SAVE
MENU
CANCEL
4 Press the shutter button to take the next
shot.
To combine only two pictures, press the
E button before taking the third frame.
5 Repeat steps 3 and 4 to take a third
frame.
After the third frame is taken, the camera
automatically processes the frames and the
combined panorama image is displayed.
To exit the panorama function without saving
an image, press the m button.
●
●