Filter
Top Products
36 EN
Adding sound to still images [R]
J
PLAYBACK MENU X R
Submenu 2 Application
YES
The camera adds (records) sound for
approx. 4 seconds while playing back
the image. This is useful for recording
notes or comments about the image.
NO No sound is recorded.
1 Use NO to select an image.
2 Aim the microphone toward the sound
source.
Microphone
3 Use LM to select [YES], and press the
E button.
Recording starts.●
Erasing images [K ERASE]
K
ERASE
Before erasing, check that no important data is
left in the internal memory or card.
Submenu 1 Application
SEL. IMAGE
Images are individually selected and
erased.
ALL ERASE
All images in the internal memory or
card are erased.
When erasing pictures in the internal memory,
do not insert the card into the camera.
When erasing pictures from the card, insert a
card into the camera in advance.
To individually select and erase images
[SEL. IMAGE]
1 Use LM to select [SEL. IMAGE], and
press the E button.
2 Use LMNO to select the image to be
erased, and press the E button to add a
R mark to the image.
1
4
2
5
3
6
IN
OK
S
MENU
BACK GO
SEL. IMAGE
R mark
3 Repeat Step 2 to select the images to be
erased, and then press the S button to
erase the selected images.
4 Use LM to select [YES], and press the E
button.
The images with a R mark are erased.
To erase all images [ALL ERASE]
1 Use
LM
to select [ALL ERASE], and press
the E button.
2 Use LM to select [YES], and press the
E button.
Saving print settings to the image data
[L PRINT ORDER]
L
PRINT ORDER
“Print Reservations (DPOF)” (p. 46)
Print reservation can be set only for still
images that are recorded to the card.
●