Olympus C-160 Camcorder User Manual


 
14
En
Getting started
Setting the date and time
1 Open the lens barrier fully.
2 Press .
The top menu is displayed.
3 Press í on the arrow pad to select MODE MENU.
4 Press Ññ to select the SETUP tab,then press í.
5 Press Ññ to select , then press í.
The green frame moves to the selected item.
6 Press Ññ to select one of the following date formats:Y-M-D
(Year/Month/Day),M-D-Y (Month/Day/Year), D-M-Y (Day/ Month/
Year).Then press
í.
Move to the year setting.
The following steps show the procedure used when the date and time settings are
set to Y-M-D.
7 Press Ññ to set the year, then press í to move to the month
setting.
To move back to the previous setting, press É.
The first two digits of the year are fixed.
8 Repeat this procedure until the date and time are completely set.
The camera only displays the time in the 24-hour time system. (“2 pm” would be
“14:00”.)
9 Press .
For a more accurate setting, press when the time hits 00 seconds. The
clock starts when you press the button.
10
Close the lens barrier to turn the camera off.
6 Press Ññ to select a language, then
press .
7 Press again to exit the menu.
8 Close the lens barrier to turn the camera off.
SELECT GO
ENGLISH
FRANCAIS
DEUTSCH
ESPAÑOL
1 D395/C160_B-E1 2004.1.30 5:54 PM Page 14 (1,1)