Filter
Top Products
28
En
Playback
Protecting pictures
You are recommended to protect important pictures to avoid accidentally
erasing them. Protected pictures cannot be erased by the single-frame/all-
frame erase function.
1 Press with the lens barrier closed.
• The monitor turns on.
2 Use the arrow pad to display the picture you want to protect.
3 Press .
• The top menu is displayed.
4 In the top menu, select MODE MENU T PLAY T , and press
í.
5 Press Ññ to select ON,then press .
• To cancel protection, select OFF.
Recorded pictures can be erased. There are two types of erase: Single-
frame erase, which erases only the picture that is displayed on the monitor,
and all-frame erase, which erases all the pictures on the card.
Single-frame erase
This function erases the picture that is displayed on the monitor.
1 Press with the lens barrier closed.
• The monitor turns on.
2 Use the arrow pad to display the picture you want to erase.
3 Press .
• The top menu is displayed.
4 Press ñ to select ERASE.
5 Press Ññ to select YES, then press .
• The picture is erased and the menu is closed.
Erasing pictures
1 D395/C160_B-E1 2004.1.30 5:54 PM Page 28 (1,1)