Filter
Top Products
33
En
Error codes
Possible cause
The card is not inserted,
or it cannot be
recognized.
There is a problem with
the card.
Writing to the card is
prohibited.
The card is full. No
more pictures can be
taken or no more
information such as
print reservation can be
recorded.
There are no pictures
on the card.
There is a problem with
the selected picture, so
it cannot be played back
on this camera.
The card is not
formatted.
The card cover is open.
Corrective action
Insert a card or insert a different card.
If the problem persists, format the card.
If the card cannot be formatted, it
cannot be used.
This card cannot be used. Insert a
new card.
Read-only has been set using a
computer. Use the computer again to
cancel the read-only setting.
Replace the card or erase unwanted
pictures. Before erasing, download
important images to a PC.
The card contains no pictures. Record
pictures.
Use image processing software to
view the picture on a PC. If that
cannot be done, the image file is
damaged.
Format the card.
All existing data are erased when the
card is formatted.
Close the card cover.
Monitor
indication
NO CARD
CARD ERROR
CARD FULL
NO PICTURE
PICTURE ERROR
CARD-COVER
OPEN
SELECT GO
CARD SETUP
POWER OFF
FORMAT
WRITE PROTECT
1 D395/C160_B-E1 2004.1.30 5:54 PM Page 33 (1,1)