Filter
Top Products
●Inserting a card
1 Make sure that:
2 Open the card cover.
3 Face the card the correct way and insert it into the card slot as
shown.
• Insert the card while keeping it straight.
• When the card is inserted fully, you will feel it lock into place.
• Inserting the card the wrong way or at an angle could damage the contact area or
cause the card to jam.
• If the card is not inserted all the way, data may not be written to the card.
4 Close the card cover.
19
1
Getting started
Inserting/Removing a card
The lens barrier
is closed.
The monitor is off.
The lamps on the right of
the viewfinder are off.
Notch
Index area side
When the card is
inserted properly.