Filter
Top Products
27
1
Getting started
Setting the date and time
6 Press Ññ to select one of the following
date formats:Y-M-D (Year/Month/Day), M-
D-Y (Month/Day/Year), D-M-Y (Day/ Month/
Year).Then press
í.
• Move to the year setting.
• The following steps show the procedure used
when the date and time settings are set to Y-M-D.
7 Press Ññ to set the year, then press í
to move to the month setting.
• To move back to the previous setting, press É.
• The first two digits of the year are fixed.
8 Repeat this procedure until the date and
time are completely set.
• The camera only displays the time in the 24-hour
time system. (“2 pm” would be “14:00”.)
9 Press .
• For a more accurate setting, press when the time hits 00 seconds. The
clock starts when you press the button.
10
Close the lens barrier to turn the camera
off.
TIPS
• The date and time can also be set from the playback mode.
• The current settings are retained even when the power is turned off.
• The date and time settings will be canceled if the camera is left
without the battery for approximately 1 hour. The settings will be
canceled more quickly if the battery was only loaded in the camera
for a short time before being removed. Before taking important
pictures, check that the date and time settings are correct.
Note
SELECTSELECT SETSET GOGO
2003 . 01 . 01
SELECTSELECT SETSET GOGO
2003 . 01 . 01