Olympus D-390 Camcorder User Manual


 
84
6
Useful functions
MODE RESET - Restoring the factory default settings
6 Useful functions
This function lets you restore functions (exposure compensation, white
balance, etc.) to the factory default settings. When MODE RESET is set in
the (movie) mode, the camera returns to the PHOTO (still picture
shooting) mode. The following settings are not reset: Settings in the MODE
MENU’s SETUP tab (ALL RESET, , REC VIEW, , etc.)
1 In the shooting mode top menu, press ñ
to select MODE RESET (P. 29).
2 Press Ññ to select ALL RESET, then
press .
Press again to exit the menu.
This function lets you choose whether or not to save the current camera
settings after the power is turned off. The settings affected by ALL RESET
are listed on next page.
ALL RESET is available in both the shooting mode and playback mode.
ON : All settings are returned to the factory default settings after the
power is turned off.
Example: If ALL RESET is ON, even if the setting is SQ1 when
the camera is turned off, it will be at HQ when the camera is turned
on again.
OFF : The settings made before the power is turned off are saved.
The ALL RESET setting (ON/OFF) applies to all the modes. If ALL RESET
is set to OFF in one shooting mode, this setting applies to all other shooting
modes, as well as the playback and modes.
ALL RESET does not affect items included in the MODE MENU’s SETUP
tab even when set to ON.
1 In the top menu, select MODE MENU T SETUP T ALL RESET T
OFF or ON, and press .
~ “How to use the mode menu” (P. 30)
Press again to exit the menu.
ALL RESET - Saving the settings
MODE RESET
MODE MENU