86
E
SPOT METERING MODE
Spot metering mode is used to obtain the right exposure
regardless of the backlight. Place the subject in the center of
the autofocus mark.
1 Press the Spot metering mode button.
● The Spot mode indicator appears on the control panel.
2 Position your subject within the autofocus mark and press
the Shutter release button halfway.
● When the focus is locked, the exposure is also locked (AE
lock).
3 Reposition your subjects in the picture frame while
keeping the Shutter release button depressed halfway.
Then press the Shutter release button fully.
● The Spot metering mode is canceled after the picture is
taken.
➧ The Green lamp next to the viewfinder lights when the
focus is locked.
<Make sure>