Filter
Top Products
2524
<AUTO>
In this mode, the flash light intensity is controlled automatically according to the lens iris (F) setting and
the amount of light input to the auto light receptor.
Light control range
1. The control panel shows the light control range according
to the camera setup.
The light control range is not displayed if the camera setup
(ISO speed and lens iris (F)) does not match one of the
usable ISO speed/lens iris (F) combinations.
In this case, the ISO and F indicators blink to alert you.
Change the camera setup (ISO speed and/or lens iris (F)).
(See page 55.)
2. Confirm that the distance to the subject is within the light
control range.
If not, adjust the lens iris (F) or the subject distance.
The light control range varies according to the camera
setup (ISO speed, lens iris (F) and lens focal length
(ZOOM)).
`çãÄáå~íáçåë= çÑ=fpl=ëéÉÉÇë= ~åÇ=äÉåë=áêáëÉë
Åçåíêçää~ÄäÉ=áå=^rql=ãçÇÉ
Memo: Test flash activation
Flash activation can be tested before actually releasing the shutter.
Press the Test button for test flash activation.
The light control is OK when the AUTO CHECK lamp blinks for about 5 seconds
after the test flash activation.
If the lamp does not blink, change the lens iris (F), ISO speed, subject distance, etc.
•
The light check by means of test flash activation is possible only in the AUTO mode.
3. When flash activation has been performed correctly, the
AUTO CHECK lamp blinks for about 5 seconds after the
shutter is released.
Lens iris
ISO speed
F8 F5.6 F4 F2.8 F2 F1.4
F11 F8 F5.6 F4 F2.8 F2 F1.4
F16 F11 F8 F5.6 F4 F2.8 F2 F1.4
F22 F16 F11 F8 F5.6 F4 F2.8 F2
F32 F22 F16 F11 F8 F5.6 F4 F2.8
F32 F22 F16 F11 F8 F5.6 F4
F32 F22 F16 F11 F8 F5.6
F32 F22 F16 F11 F8
F32 F22 F16 F11
3200 1600 800 400 200 100 50 25
ZOOM indicator
Displayed according to the
focal distance of the lens.