Filter
Top Products
Symptom
The shutter doesn't
release even when
the shutter release
button is pressed.
The flash doesn't
fire.
+/-
blinks
in the
viewfinder.
The shutter cannot
be released by
remote control.
Cause
The subject is not in focus.
The rewound film is still loaded.
Ambient light is too bright.
High-speed film is used.
Exposure is incorrect in the Aperture-
Preferred Auto mode.
If no operations have been carried out in
the Selftimer/Remote Control mode for
about 20 minutes, the LCD panel turns off
and the shutter can't be released with the
remote control.
Remedy
Make sure the subject is in focus and
the autofocus indicator in the
viewfinder lights.
Remove the film.
Set the flash mode to Fill-In.
Set the flash mode to Fill-In.
Change the aperture until +/- stops
blinking. Use the flash when
available light is insufficient.
Press the FULL AUTO button to turn
on the LCD panel, and engage the
Selftimer/Remote Control mode
again.
See
24
26
34
34
41
66