Filter
Top Products
33
CHECKING THE BATTERIES
When the power is turned on in the Record mode, the remaining battery
power will be displayed on the control panel.
lights and turns off automatically.
Batteries are OK. You can shoot.
blinks and other indicators on the control panel are displayed
normally.
Battery power is low and batteries should be replaced.
blinks and other indicators on the control panel go out.
Batteries are dead and should be replaced immediately.
Note:
• When taking pictures on a special occasion, on a trip, or in cold
temperatures, keep spare batteries handy.
• When the camera is being operated on batteries that are running low, the
camera may emit several short beeps and blink the number of storable
pictures on the control panel after you take a shot or when you turn on
the power. If this happens, the picture you have just taken will not turn
out properly. Replace the batteries and take the picture again.