Filter
Top Products
99
USING A PERSONAL
COMPUTER
Install CAMEDIA Master (provided).
Make sure that the power of the personal computer and the
camera are OFF before connecting.
Connect the RS-232C PC serial cable to the computer’s serial
port.
Open the Connector cover on the camera, and connect the
cable to the camera’s Computer connector.
Turn on the personal computer.
Open the lens barrier on the camera to turn it on.
Start CAMEDIA Master on the computer.
7
6
5
4
3
2
1
Note:
• Do not connect when the power of the camera is on as it may cause a
camera malfunction.
• Use of the optional AC adapter is recommended for computer
downloads.
• Camera functions will be disabled while the camera is connected to a
computer.
• The computer cannot communicate with the camera when the lens
barrier is closed.