Filter
Top Products
57
EXPOSURE COMPENSATION
In addition to automatic exposure, you can also adjust it manually by +/–
2 (approx. 0.5 steps). Adjust + when the subject is mostly bright. Adjust –
when the subject is mostly dark.
Open the lens barrier and
press the Menu button to
display the screen shown.
Make an adjustment using the
+/– buttons, then press the OK
button to save the setting.
• If the Menu button is pressed
while the setting is being
entered, it will be canceled and
the next setting menu will
appear.
• appears on the control
panel.
2
1
0
SET
OK
NEXT
Note:
• The setting will remain if HOLD is selected in Setting Reset, but will be
canceled when the batteries are taken out. (p. 70)
• Although the brightness of the LCD monitor can be changed with the
exposure compensation, it may not appear to change when the subject is
mostly dark. In such a case, display the recorded picture on the LCD
monitor to check its brightness.
• The exposure compensation may not work properly when shooting with
the flash.
1 2
LCD monitor