Filter
Top Products
61
WHITE BALANCE
You can match the white balance to the light source by selecting Auto,
(Daylight), (Overcast), (Tungsten light) or (Fluorescent
light).
Open the lens barrier and
press the Menu button several
times to display the screen
shown.
Select the white balance using
the +/– buttons, then press the
OK button to save the setting.
• If the Menu button is pressed
while the setting is being
entered, it will be canceled and
the next setting menu will
appear.
• WB appears on the control
panel when a setting other
than AUTO is selected.
2
1
WB
SET
OK
NEXT
AUTO
HQ
WB
Control panel
1
2
LCD monitor
Note:
• Select AUTO in normal situations.
• The Preset white balance may not work under special lighting.
• The setting will remain if HOLD is selected in Setting Reset, but will be
canceled when the batteries are taken out. (p. 70)
• Confirm results in the Display mode.