Filter
Top Products
En 13
En
6
Close the connector cover.
• Press the mark in the illustration when
closing the connector cover.
Removing the card
1
Open the connector cover and
the card cover.
2
Push the card all the way in to
unlock it, then let it return slowly.
• The card is ejected a short way and then
stops.
3
Hold the card straight and pull it
out.
• Do not press on the card with hard or pointed items such as ballpoint
pens.
Do not close the connector cover without
first closing the card cover.
Note
Releasing your finger quickly after pushing
the card all the way in may cause it to eject
forcefully out of the slot.
Note
Note
basic_e_opx_6.fm Page 13 Thursday, December 12, 2002 10:44 AM