Filter
Top Products
E-8
Fitting the mode dial knob E-21
Check the loading status.
E-22
Seal the Case.
E-22
Install the special balance weight.
E-22
Perform the final checks after loading.
E-23
Installation and Removal of the LCD Hood
E-24
Installation
E-24
Removal
E-24
Mounting and Removing the Lens Cap
E-25
Perform the final checks.
E-25
Visual Inspection
E-25
Final Test
E-26
4. Taking Pictures Under Water E-27
How to Use the Hand Strap E-27
Take pictures carefully.
E-27
Confirm the picture on the LCD monitor.
E-27
Quietly press the shutter lever.
E-27
Cautions when using the flash
E-27
5.
Underwater Shooting According to the Scene Type
E-28
Shooting scene modes E-28
Selecting the scene mode.
E-28
6. Handling After Shooting E-29
Wipe off any waterdrop. E-29
Take out the digital camera.
E-30
Wash the Case with pure water.
E-31
Dry the Case.
E-31
7. Maintaining the Waterproof Function E-32
Remove the O-ring. E-32
Remove any sand, dirt, etc.
E-32
Install the O-ring.
E-33
How to Apply Grease to the O-ring
E-33
Replace consumable products.
E-34
Maintenance of the threaded sections on the
TTL cable and TTL cable connector
E-35
Maintenance of the TTL Connector Cap
E-35
8. Appendix E-36
Q & A on the use of the PT-027 E-36
After-sale Service
E-41
Specifications
E-42