Filter
Top Products
Menu operations
EN
29
• Even when [FACE DETECT] is set, faces may not be detected depending on the subject.
• When [FACE DETECT] or [iESP] is selected, AF target mark is not displayed in shooting
standby.
When activated [ON], the camera will record about 4 seconds of audio
after the picture is taken.
When recording, aim the camera microphone at the source of the sound
you want to record.
When holding the camera, keep your fingers away from the microphone.
This function allows you to mute operational sounds during shooting and playback
(e.g. warning beeps, shutter sounds, etc…).
ESP/n ................................... Changing the area for measuring the brightness of a subject
ESP Meters the brightness at the center of the monitor and the surrounding area
separately to capture an image with balanced brightness. When taking
pictures against strong backlight, the center of the picture may appear dark.
n Only the center of the monitor is metered. Recommended for taking a picture
against strong backlight.
AF MODE ....................................................................................... Changing the focusing area
FACE
DETECT
The camera searches a face within the frame and focus on it.
iESP The camera determines which subject within the screen to focus on. Even
when the subject is not in the center of the screen, focusing is possible.
SPOT Focus selection is based on the subject within the AF target mark.
R ............................................................................................Recording sound with still pictures
OFF / ON
SILENT MODE Turning off camera sounds
OFF / ON
W
W
T
T
10
M
10
M
P
4
4
IN
N
ORM
N
ORM
960
hPa
0
m
960
hPa
0
m
W
W
T
T
10
M
10
M
P
4
4
IN
N
ORM
N
ORM
960
hPa
0
m
960
hPa
0
m
Zoom bar
White : The optical zoom area
Yellow : The digital zoom area
Optical zoom Digital zoom
Microphone
7
d4354_e_0000_7.book Page 29 Thursday, December 20, 2007 10:25 AM