Olympus 1030 SW Digital Camera User Manual


 
56
EN
Getting to know your camera better
Some items are not be selectable from the menus when using the arrow pad.
(The menu items displayed in gray cannot be selected.)
Items that cannot be set with the current shooting mode
Items that cannot be set because of an item that has already been set:
When [DRIVE] is set to [W], [FINE ZOOM] or [DIGITAL ZOOM] cannot be set.
Some functions cannot be set by pressing the function buttons depending on the camera
setting.
[%], Flash Mode, etc.
Some functions cannot be used when there is no card in the camera.
[PANORAMA], [PRINT ORDER], [FORMAT], [BACKUP]
You cannot change the function settings when the mode dial is set to g.
This camera retains the settings (except for s) even after the power is turned off. To
return the settings to default settings, execute [RESET].
g “RESET Restoring default settings” (P. 24)
The monitor may be difficult to see and the exposure difficult to confirm when shooting
outdoors.
Press g/E/Y repeatedly to display the histogram
Set the exposure so that the graph is concentrated on the outer edges and the graph is
balanced on both sides.
g g/E/Y button Changing the information on display/Display the menu guide/Turning
on the LED illuminator/Checking the time” (P. 19)
Depending on the picture, the red-eye may not be fixed. Also, parts except the eye may be
fixed.
Light reflecting from dust and other particles in the air at night may appear as bright specks
in pictures taken using the flash.
Functions that cannot be selected from menus/Functions that cannot be
selected even by pressing the function buttons
Restoring default settings
Confirming the exposure when the monitor is difficult to see outdoors
How to read the histogram
1If the peak fills too much of the frame, the image will appear
mostly black.
2If the peak fills too much of the frame, the image will appear
mostly white.
3The part indicated in green in the histogram shows the luminance
distribution in the center area of the monitor.
Playback help and troubleshooting tips
The red-eye cannot be fixed
Bright specks appear in the picture
1
2
3
3
d4354_e_0000_7.book Page 56 Thursday, December 20, 2007 10:25 AM