Filter
Top Products
EN
49
Using OLYMPUS Master
To disconnect the camera
1 Make sure that the card access lamp has stopped
blinking.
2 Make the following preparations for
disconnecting the USB cable.
Windows
1 Click the “Unplug or Eject Hardware” icon in the system
tray.
2 Click the message that is displayed.
3 When a message is displayed saying that the hardware can
be ejected safely, click “OK”.
Macintosh
1 The trash icon changes to the eject icon when the “Untitled”
or “NO_NAME” icon on the desktop is dragged. Drag and
drop it on the eject icon.
3 Disconnect the USB cable from the camera.
Note
• Windows: When you click “Unplug or Eject Hardware”, a warning message may be displayed.
Make sure that image data is not being downloaded from the camera and that all applications
are closed. Click the “Unplug or Eject Hardware” icon again and disconnect the cable.
Card access lamp
For detailed operations of OLYMPUS Master, refer to the quick start guide displayed
upon startup or the help of the OLYMPUS Master.
d4354_e_0000_7.book Page 49 Thursday, December 20, 2007 10:25 AM