Filter
Top Products
44
EN
Using the neutral density (ND) fi lter
Use the camera’s built-in neutral density fi lter to reduce
the amount of light entering the camera for slower shutter
speeds and wider apertures.
1
Press A to display the live control and use
FG to highlight the ND fi lter.
P
ND Filter OffND Filter Off
OFFOFF
±0.0±0.0
OFFOFF
AFAF
OFFOFF
ND fi lter
2
Use HI to highlight [ND Filter On] and press
A to select.
Using face priority
When face priority is on, the camera sets focus and
exposure for the face shown by a frame.
1
Press A to display the live control and use
FG to highlight face priority.
P
Face Priority On AF Area Face Priority On AF Area
OFFOFF
±0.0±0.0
OFFOFF
AFAF
Face priority
2
Use HI to highlight [Face Priority On] and
press A to select.
To view the AF target display, press the INFO
button.
3
Point the camera at your subject.
If a face is detected, it will be indicated by a white
border.
4
Press the shutter button halfway to focus.
When the camera focuses on the face in the white
border, the border will turn green.
5
Press the shutter button the rest of the way
down to shoot.
Face priority applies only to the fi rst shot in each
sequence taken during sequential shooting.
Depending on the subject, the camera may not be
able to correctly detect the face.
●
●
●