Filter
Top Products
62
EN
Using a remote control
Using a remote control
1 Select [On] for [HDMI Control] and turn the camera off.
2 Connect the camera to the TV using an HDMI cable.
“Using an HDMI cable” (p. 61)
3 First turn on the TV, and then turn on the camera.
Follow the on-screen guide displayed by the TV to
operate the camera.
With some TVs, operations cannot be performed with
the TV remote control even though the operation
guide is displayed on the screen.
If operations cannot be performed with the TV remote
control, set [HDMI Control] to [Off] and use the
controls on the camera.
Reducing power consumption between
Reducing power consumption between
shots [Sleep]
shots [Sleep]
x (Setup menu) X Sleep
Submenu 2 Application
20sec/1min/3min/
5min
The monitor turns off automatically
to save battery power when no
operations are performed (sleep
mode). Choose the delay before the
camera enters sleep mode.
If no operations are performed for about 12 minutes
after the camera enters sleep mode, the camera will
turn off automatically.
Canceling sleep mode
Canceling sleep mode
Press the shutter button or an arrow key or rotate the
mode dial.
●
Changing the display language [
Changing the display language [
W
W
]
]
x (Setup menu) X W
Submenu 2 Application
Languages
The language for the menus and
error messages displayed on the
monitor is selected.
1 Use FGHI to select your language and press the
A button.
Setting the date and time [
Setting the date and time [
X
X
]
]
x (Setup menu) X X
“Date, time, time zone, and language” (p. 18)
To select the date display order
To select the date display order
1 Press I after setting Minute, and use FG to select
the date display order.
YMD Time
2011
Y
/
M
/
D
..02 26 㧦12 30
X
Cancel Set
Date order
2 Press A when settings are complete.