Filter
Top Products
User’s Manual
BX-AL133
For more information, please visit our website at:
http://www.OptomaUSA.com
User’s Manual | 16
Addendum: Adapter Plate
This attachment plate is designed to be installed onto a ceiling mounted projector. The
location or orientation of the ceiling mount does not need to change.
Contents
1 Lens Plate
1 (Bag) Projector Attachment Parts
1 Assembly Kit (Includes)
2 Plate Hook Assemblies
1 Chain (6 ft)
4 Chain Ends
4 Lens Mounting Assemblies
4 Sled Mounting Screws
2 Sled Safety Assemblies
1 Hex Key
Required Tools and Equipment
2 Ceiling Hooks (40 lbs Capacity Each)
1 Phillips Screwdriver
1 Pair of Pliers
1 Strong Pair of Scissors or Wire Cutters
1. INSTALL PLATE HOOK ASSEMBLIES. Use the pliers to bend the closed-end of the
hooks apart just enough to insert the end of the chain. Install the plate hook assemblies
in the two holes. Place one hook end on the top side and then continue the assembly
down in the order of nut, washer, lens plate, washer, lock washer and nut. Arrange the
assembly so that the plate is in the center of the threaded hook shaft.
2. ATTACH LENS PLATE. Remove the projector from the ceiling and the ceiling mount
adapter plate. Position the ceiling mount adapter plate over the lens plate and the
projector. Line up the holes of the lens plate (labeled holes for projector and ceiling
mount in the diagram above) with the holes of the ceiling mount and projector. Install the
silver screws from the attachment parts bag.
Ceiling mount hardware may vary. If the provided screws are not long enough,
purchase the longest metric M4 screws without exceeding the depth of the projector
mounting holes for the greatest security.
3. MOUNT PROJECTOR ASSEMBLY. Securely connect the ceiling mount adapter, lens
plate and projector assembly to the ceiling mount and then adjust the ceiling mount to
provide the proper 16:9 image orientation in the center of your 2.35:1 screen.
Lens Plate
Holes For:
Projector and Ceiling Mount
Hooks
Lens Only
Motorized Sled
Front
Ceiling Side (Top)