Filter
Top Products
30
Menu operations
The MENU button and JOG dial button are used for the setting
menu operations. The menus consist of main menus and sub-
menus. The data set on the sub-menus is saved in the non-volatile
memory and stored for a prolonged period of time.
Menu display enable/disable
Displaying sub-menus and
deciding on settings
1
Press the MENU button.
1
Rotate the JOG dial button while the main
menu is displayed.
2
When the JOG dial button is pressed, the
main menu MAIN 1/2 screen is displayed.
3
When the JOG dial button is pressed, the
main menu MAIN 2/2 screen is displayed.
4
When the JOG dial button is pressed
again, the display returns to the SCENE
screen.
4
Rotate the JOG dial button to change the
setting, and press the JOG dial button at
the desired setting. The setting is now
entered.
5
If there is another item to be set, rotate the
JOG dial button to move the cursor, and
decide on the setting by performing steps
3 and 4.
7
Upon completion of the settings, press the
MENU button.
6
To move to another sub-menu, rotate the
JOG dial button to move the cursor to the
sub-menu title, and press the JOG dial
button.
5
To clear the menu screen, press the MENU
button.
SCENE
MAIN 1/2
MAIN 2/2
Press the MENU
button.
Press the MENU
button.
Press the JOG dial
button.
Press the JOG dial
button.
Press the JOG dial
button.
}
}
}
}
}
}
Menu screen is
cleared.
55
Press the MENU
button.
5
Press the MENU
button.
5
NEXT
¢¢¢¢
MAIN 2/2
¢¢¢¢
#
MARKER/ZEBRA..
VF DISPLAY 1/2..
VF DISPLAY 2/2..
! LED..
GENLOCK..
CAMERA ID..
TIME/DATE..
DIAGNOSTIC..
Rotate the JOG
dial button.
I
Example:
2
Move the “
#
” to the desired sub-menu
item, and press the JOG dial button.
3
< MARKER/ZEBRA >
#
SAFETY ZONE :06
CENTER MARK :ON
ZEBRA1 DETECT :070%
ZEBRA2 DETECT :085%
ZEBRA2 :SPOT
VF DTL :1
Rotate the JOG
dial button.
I
Example:
3
Rotate the JOG dial button to move the
cursor to the sub-menu item to be
changed, and press the JOG dial button.
The setting now flashes.
3
< MARKER/ZEBRA >
#
SAFETY ZONE :06
CENTER MARK :ON
ZEBRA1 DETECT :070%
ZEBRA2 DETECT :085%
ZEBRA2 :SPOT
VF DTL :1
I
The main menu SCENE screen is displayed.
The cursor moves to the sub-menu items.
The sub-menu screen now appears. (“#” appears at the sub-
menu title.
The settings are stored in the memory, the setting menu mode
is exited, and the normal operation mode is restored.
The main menu screen now appears. Follow the same
procedure.
Rotate the JOG
dial button.
Example: