Filter
Top Products
37
TIME/DATE
Item
Setting
options
Remarks
YEAR 00
:
01
:
99
For setting the year.
MINUTE 00
:
59
For setting the minutes.
MONTH 01
:
12
For setting the month.
HOUR 00
:
23
For setting the hour.
DAY 01
:
31
For setting the day of the month.
DIAGNOSTIC
Item
Setting
options
Remarks
OPERATION
VTR ON time (indicated in hour increments)
SERVO Ver
SERVO software version display
DRUM RUNNING
Head cylinder rotation time (indicated in
hour increments)
SYSCON Ver
SYSCON software version display
CAMERA Ver
CAMERA software version display
THREADING
Number of loading/unloading times
CAMERA ID
Item
Setting
options
Remarks
CAMERA ID ID
ID+ (TIME+
DATE)
OFF
For displaying and recording the ID data
when color bar signals are supplied.
ID:
The ID data is displayed and recorded.
ID+(TIME+DATE):
The ID data and time/date are displayed
and recorded.
OFF:
The ID data is neither displayed nor
recorded.
Menu contents
MAIN menu 2 of 2 (main menu)
!LED
Item
Setting
options
Remarks
GAIN OFF
W/O 0d
B
For setting the !LED display ON or OFF at
any gain setting except 0 dB.
OFF: Not displayed
W/0 dB:Displayed at any gain setting
except 0 dB.
SUPER V ON
OFF
For setting the !LED display ON or OFF
when SUPER V is ON.
ON: Displayed OFF: Not displayed
WHITE ATW
PRE
OFF
For setting the !LED display ON or OFF
when the WHITE BAL switch is at the PRE
position or ATW has been set.
ATW:Displayed in the ATW mode.
PRE: Displayed when PRE is the position
setting.
OFF: Not displayed
FILTER OFF
W/O No 1
No 1
NG
For setting the !LED display relating to the
filter ON or OFF.
OFF: Not displayed
W/0 No.1:Displayed except when filter 1 is
set.
No.1: Displayed when filter 1 is set.
NG: Displayed when the filter position
is not fixed.
EXTENDER ON
OFF
For setting the !LED display ON or OFF
when the extender is ON.
ON: Displayed OFF: Not displayed
SHUTTER ON
OFF
For setting the !LED display ON or OFF
when the shutter is ON.
ON: Displayed OFF: Not displayed
Whether the !LED display is to appear on the viewfinder screen is
selected on this menu.
GENLOCK
Item
Setting
options
Remarks
SC PHASE FINE 000
:
128
:
255
For finely adjusting the burst phase during
gen-lock.
H PHASE 000
:
200
:
255
For finely adjusting the horizontal sync
phase during gen-lock.
SC PHASE
COARSE
00
:
07
:
15
For coarsely adjusting the burst phase
during gen-lock.
“ ” indicates the factory setting.