Filter
Top Products
E-24
ENGLISH
Menu item
Menu
The menu items on the unit may vary with the
camera recorder connected to the unit.
For the following menu items, the factory settings
for the unit only are set separately from the
camera recorder.
BLACK-VR-CONTROL, BLACK-VR-
MODE, and BLACK-VR-RANGE in
“BLACK”
GAIN-VR-MODE and GAIN-VR-RANGE in
“WHITE”
BUZZER, LCD CONTRAST, and SW
BRIGHT in “SYSTEM”
MODE and SPED in “SHUTTER”
When the column of “Storage” in the menu table
is answered with “Yes”, the settings for the
relevant items can be stored on the unit or the
SD memory card as a scene file. For details,
refer to “Operation of the scene file” (page 19)
and “Saving/Loading of scene files onto the SD
memory card” (page 21).
BLACK
<Note>
When “PED” is selected in the BLACK-VR-CONTROL
and the lamp of the VR ACTIVE button is on or “ABS”
(absolute value) is selected in the BLACK-VR-MODE
item, it is impossible to adjust the PRED/GPEG/BPEG
items using the rotary encoder. Adjust these items using
the BLACK volume.
is the factory setting mode.
Layer
Item
Variable
range
Contents description
Storage
1
RPED
–100
:
+100
To set the pedestal for
Rch Yes
GPED
–100
:
+100
To set the pedestal for
Gch Yes
BPED
–100
:
+100
To set the pedestal for
Bch Yes
2
BLACK-VR-
CONTROL
FLR
PED
To select the items to be
adjusted using the
BLACK volume
FLR: FLARE
PED: PEDESTAL
Yes
3
BLACK-VR-
MODE
ABS
REL
To select whether the
BLACK volume of the
RGB is operated using
the absolute value or
the relative value
ABS: Absolute value
REL: Relative value
Yes
4
BLACK-VR-
RANGE
MIN
NORM
MAX
To switch the variable
range of the BLACK
volume of RGB
MIN:
n
25
NORM:
n
50
MAX:
n
100
Yes
AJ-RC10G(VQT1A65-1).book 24 ページ ２００７年２月１４日 水曜日 午後４時１６分