Filter
Top Products
– 114 –
MAIN Menu Screen 1 of 4 (SUB menus)
LOW SETTING screen
The low level gain settings are performed on this screen.
|Note{
DARK DTL and LEVEL DEPEND
serve opposite purposes: LEVEL
DEPEND is automatically set to 0
when DARK DTL is set to a value
other than 0 and, conversely, DARK
DTL is automatically set to 0 when
LEVEL DEPEND is set to a value
other than 0.
The underlining in the variable range column indicates the setting in the preset mode.
USER menu: The USER menu appears when the MENU switch is set to SET.
ENG menu: The ENG menu appears when the MENU switch is set to SET while the SHIFT/ITEM button and UP button are
held down together.
Variable
range
p3 dB
.
.
.
0 dB
.
.
.
30 dB
0
.
.
.
10
.
.
.
31
0
.
.
.
10
.
.
.
31
0
.
.
.
3
.
.
.
15
1
.
.
.
3
.
.
.
5
0
.
.
.
5
0
.
.
.
15
0.35
.
.
.
0.45
.
.
.
0.75
ON
OFF
A
B
OFF
Remarks
This sets the gain to p3, 0, 3, 6, 9, 12,
15, 18, 21, 24 or 30 dB.
This sets the H.DTL (detail) level.
This sets the V.DTL (detail) level.
This sets the DTL coring.
This selects the H.DTL frequency.
1: 2.5 MHz 4: 4 MHz
2: 3 MHz 5: 4.5 MHz
3: 3.5 MHz
This sets the dark detail.
This boosts the detail of the black
areas.
This sets LEVEL DEPEND.
This eliminates the detail only in the
dark areas when the Y detail is
boosted. The higher the number
selected, the wider the range across
which the detail is eliminated.
This sets the master gamma in
0.01 increments.
This selects ON or OFF for the mode
in which low-illumination blackouts are
compensated for.
This selects the color compensation
matrix table.
VF
display
ENG
ENG
ENG
ENG
ENG
ENG
ENG
ENG
ENG
ENG
¢
|
LOW SETT ING
{
MASTER
MASTER
GA I N
:
:
:
:
:
:
:
:
:
:
0dB
H.DTL
H.DTL
DTL
LEVEL
LEVEL
.DTL
DTL
LEVEL
10
V10
CORING 03
FREQ . 03
DARK 00
DEPEND. 00
GAMMA 0.45
BLACK STRETCH OFF
TABLE AMATR I X
»
»
»
Item
MASTER GAIN
H.DTL LEVEL
V.DTL LEVEL
DTL CORING
H.DTL FREQ.
DARK DTL
LEVEL DEPEND.
MASTER
GAMMA
BLACK
STRETCH
MATRIX TABLE
È indicates an ON/OFF setting.