Filter
Top Products
–65–
WIDE
CH1 CH2
20
0
EMPHASIS
dB
10
30
40
E TAPE F
E BATT F
RF
SERVO
HUMID SLACK
DF
SLAVE TCG HOLD
h min s frm
Displays
Time Code-Related Displays
Relationship between the TCG and DISPLAY switch setting positions and the time counter
display
The item displayed in the time counter display is determined by the TCG switch and DISPLAY
switch settings.
Time code-related switch settings and display items
These lamps light to indicate the time code, CTL and real time displays.
DF: This lamp lights during drop frame mode
SLAVE: This lamp lights when the time code is locked to an external source.
HOLD: This lamp lights when the time code generator is held (when the HOLD button is pressed).
WIDE: This lamp lights when a tape is recorded or played back with an aspect ratio of 16:9.
Time counter display: This displays the time code, CTL, user bit and real time.
ÁSee below for the relationship between displayed items and switch settings.
TCG switch
position
SET
F-RUN or R-RUN
DISPLAY switch
position
TC or CTL
UB
CTL
TC
UB
Displayed item
Time code
User bit
CTL
Time code
User bit