Filter
Top Products
–37–
Adjusting the Viewfinder (The viewfinder shown in the illustration is the optional AJ-VF10P.)
Mounting the Viewfinder
1 Press down the viewfinder.
2 Tighten the viewfinder stopper screw firmly. If it is difficult to insert the screw, press down the
viewfinder once again.
3 Connect the plug to the viewfinder connector and secure the viewfinder cable with the clamp.
|Note{
Insert the plug firmly when connecting it to the viewfinder connector.
Detaching the Viewfinder
1 Check that the POWER switch is set to OFF.
2 Disconnect the plug from the viewfinder cable connector.
|Note{
Use both hands to detach the viewfinder. The viewfinder may not detach smoothly with one
hand, resulting in damage to the viewfinder.
3 Loosen the viewfinder stopper screw and detach the viewfinder by pulling it straight up.
Hook your fingers here.
Stopper Screw
Pull straight up.
Stopper Screw