Filter
Top Products
– 146 –
MAIN Menu Screen 4 of 4 (SUB menus)
INITIALIZE screen
The MENU display item settings are reset on this screen. Align the arrow (>) with the item and press the UP or DOWN button to
initiate the corresponding operation.
|Note{
The camera ID, GENLOCK, CARD R/W SELECT and TIME/DATE are not returned to
the factory setting.
DIAGNOSTIC screen
The unit’s operating statuses and software version are displayed on this screen.
Item
READ FACTORY
DATA
WRITE USER
DATA
Variable
range
——
——
Remarks
This returns the menu data to the
factory settings.
This saves the menu data inherent to
the user in the camera’s memory.
VF
display
ENG
ENG
Item
OPERATION
DRUM RUNNING
THREADING
VTR SYSCON
CAM SYSCON
DATA ROM
DV
Variable
range
——
——
——
——
——
——
——
Remarks
Unit’s operating time with the power
ON
Rotating time of the drum
Number of times the tape has been
loaded
Software version display
Software version display
Software version display
Software version display
VF
display
ENG
ENG
ENG
ENG
ENG
ENG
ENG
ÁThe DIAGNOSTIC screen can be displayed on the viewfinder when the MENU SET/
OFF switch is set to SET while the HOLD button is held down, and the PAGE switch
is pressed.
The underlining in the variable range column indicates the setting in the preset mode.
USER menu: The USER menu appears when the MENU switch is set to SET.
ENG menu: The ENG menu appears when the MENU switch is set to SET while the SHIFT/ITEM button and UP button are
held down together.
INITIALIZE
READ FACTORY DATA
DATA
W
R I TE USER
{
¢
|
DIAGNOSTIC
{
OPERAT I ON
:
:
:
00000 ∑ 1
DRUM RUNN I NG
THREAD I NG
VTR SYSCON
SYSCON
Ve r
|
P
CAM
DAT ROMA
0
1.00
{
Ve r
|
1.0 1.0
{
Ve r
|
1.0
{
DV Ve r
|
1.00
{
∑∑ . ∑∑ . ∑∑
h
00000 ∑ 10
00000 ∑ 10
h
|