Filter
Top Products
– 155 –
Specifications
General
Operating temperature: 32uF to 104uF (0uC to 40uC)
Storage temperature: p4uF to 140uF (p20uC to 60uC)
Operating humidity: Less than 85% (relative humidity)
Continuous operating time: Approx. 90 min. (using 1 Anton Bauer Trimpac 14 battery)
Weight: 14.52 lbs (6.6 kg) (incld. main unit, viewfinder, lens,
battery pack, tape and microphone)
Dimensions: 4
13
/16½ (W)q8
1
/16½ (H) (excluding grip)q12
3
/8½ (D)
122.5q204q313 mm
Camera Section
Pick-up devices: 2/3-inch on-chip IT type of CCD
System: RGB 3-CCD system
Picture elements: 520,000 pixels
Spectral system: F1.4 prism system
Built-in filters: 1; 3200 K
2; 5600 Ko1/8ND
3; 5600 K
4; 5600 Ko1/64ND
Quantization: 10-bit A/D (R, G and B channels each)
Digital signal processing: 16-bit long operation, 18 MHz/36 MHz
Horizontal drive frequency: 18.0 MHz
Programmable gains: Any 3 position settings from p3, 0, 3, 6, 9, 12, 15, 18, 21, 24
and 30 dB
Super gain: 30 or 36 dB selectable
Shutter speeds: 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000 sec.
Synchro scan mode; 1/60.8 sec. to 1/250 sec.
Lens mount: 2/3½ Bayonet type
Sensitivity: F11 (2000 lux, 89.9% reflection)
Minimum subject brightness: Approx. 0.5 lux (at F1.4, o36 dB)
Image S/N ratio: 63 dB (typ)
Horizontal resolution: 750 lines (center, typ)
Vertical resolution: 400 lines/more than 450 lines (SUPER V mode)
Sampling frequency: 18 MHz
Registration: Below 0.05% (entire range) (excluding lens distortion)
Viewfinder (AJ-VF10P, optional accessory)
CRT: 1.5½ monochrome
Horizontal resolution: 600 lines (center)
External controls/switches Controls; BRIGHT, CONTRAST, PEAKING
Switches; TALLY, ZEBRA
Power supply voltage: DC 12 V
Power consumption: 24 W