Panasonic AJ-D910WBP Digital Camera User Manual


 
132
Item
ID READ/WRITE
MENU-1/4
LEVEL R/W
MENU-1/4
SW (È) R/W
MENU-2/4
ALL R/W
MENU-3/4
ALL R/W
Variable
range
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
Remarks
This selects ON or OFF for recording
and loading the camera ID during
setup card read/write operations.
(See F)
ON: Recording/loading is enabled.
OFF: Recording/loading is disabled.
This selects ON or OFF for recording
and loading the adjustments made
with the LEVEL item on MAIN menu
screen 1 of 4 during setup card read/
write operations.
ON: Recording/loading is enabled.
OFF: Recording/loading is disabled.
This selects ON or OFF for recording
and loading the items indicated by (È)
alongside the ON/OFF items on MAIN
menu screen 1 of 4 during setup card
read/write operations.
ON: Recording/loading is enabled.
OFF: Recording/loading is disabled.
This selects ON or OFF for recording
and loading the MAIN menu 2 of 4
data during setup card read/write
operations.
ON: Recording/loading is enabled.
OFF: Recording/loading is disabled.
This selects ON or OFF for recording
and loading the MAIN menu 3 of 4
data during setup card read/write
operations.
ON: Recording/loading is enabled.
OFF: Recording/loading is disabled.
VF
display
USER
ENG
USER
ENG
USER
ENG
USER
ENG
USER
ENG
MAIN Menu Screen 3 of 4 (SUB menus)
CARD R/W SELECT screen
Whether the recording of specific menu data onto, or the loading of the data from, the setup card is to be set to ON or OFF on this
screen.
FFor instance, set the ID READ/WRITE item to OFF when the camera ID is not to be
changed when reading from or writing onto the setup card.
The underlining in the variable range column indicates the setting in the preset mode.
USER menu: The USER menu appears when the MENU switch is set to SET.
ENG menu: The ENG menu appears when the MENU switch is set to SET while the SHIFT/ITEM button and UP button are
held down together.
{
W
RITE
R/
W
R/
W
SELECT
ID READ/ FF
:
ON
R/
W
:
ON
R/
W
:
ON
R/
W
LEVE
S
W
(
»
ALL
MENU
MENU
MENU
1/4
1/4
2/4
ALL
L
)
MENU3/4
:
ON
:
O
CARD
¢
|
|Note{
The settings selected on the
|CARD R/W SELECT{ screen are
also valid when user area data in the
camera’s memory is read out
(READ USER DATA).
However, when user area data is
written into the camera’s memory
(WRITE USER DATA), all the data
will be recorded regardless of the
settings selected on the |CARD
R/W SELECT{ screen.