Filter
Top Products
–99–
Recording
Successive Shooting in Other Cases
If successive shooting is to be performed after the tape has been run, the cassette has been
ejected, or when using a tape which has only been recorded part-way, follow the procedures
outlined below.
1 While monitoring the viewfinder screen, press the PLAY/PAUSE button to play back the tape.
2 At the place where a new recording is to continue on from the existing recording, press the
PLAY/PAUSE (or STOP) button again to stop the tape.
3 Press the RET button on the lens. Preparations for frame-to-frame continuity are made about
two seconds later.
4 Press the VTR START button of the unit or the VTR button of the lens to start recording.
1,2
4
3