Filter
Top Products
– 102 –
Chapter 5 Preparation — Preparing for audio input
Preparing for audio input
Prepare the camera for connecting audio input devices.
Using the front microphone
Microphones such as the stereo microphone kit AJ-MC900G (optional) can be mounted.
Viewfinder
Microphone holder
<MIC IN> terminal
Viewfinder clamping screw
Fig. 1 Fig. 2 Fig. 3
1
Open the microphone holder. (Fig. 1)
2
Mount the microphone and tighten the viewfinder clamping screw. (Fig. 2)
Mount with the UP indication on the microphone facing up.
3
Connect the microphone cable to the <MIC IN> terminal on the camera. (Fig. 3)
4
According to the audio channel to be recorded, switch the <AUDIO IN> switch to <FRONT>.
Using a wireless microphone receiver
Fig. 1
1
Remove the cover to insert the wireless microphone receiver and secure it with the screws. (Fig. 1)
2
According to the audio channel to be recorded, switch the <AUDIO IN> switch to <W.L.>.
3
When using a two-channel wireless microphone receiver, set [DUAL] in the main menu → [I/F SETUP] → [MIC/AUDIO] →
[WIRELESS TYPE].