– 91 –
Chapter 4 Adjustments and Settings for Recording — Handling setting data
Writing and reading lens les to and from SD memory card
Eight lens les stored to internal memory on the camera can be written to SD memory card as a card le with a single title. Eight titles can be written to
SD memory card. Lens les written to SD memory card can be read to internal memory as a written title (containing eight lens les).
The following shows the relationship between lens les stored to internal memory and lens les written to SD memory card.
Internal memory
Card file
Title 1 Title 2 Title 3 Title 4
Title 5 Title 6 Title 7 Title 8
8 lens files
Up to eight lens files can be stored in internal memory.
Eight lens files×8 = 64 lens files can be
written.
The contents of the eight lens files can be written to and read from SD memory cards as a card file with a single title.
Writing lens les to SD memory card
Fig. 1 Fig. 2
1
Select [SAVE] in the main menu → [FILE] → [LENS FILE (SD CARD)], and press the jog dial button (or <SET> button). (Fig. 1)
The list of lens les currently saved in camera memory is displayed.
2
Select the file to write from the file list. (Fig. 2)
The title entry screen and keyboard are displayed.
3
Enter the desired characters with the keyboard.
4
Use the jog dial button (or cursor buttons `/{/Y/I) to select [OK], and press the jog dial button (or <SET> button).
The conrmation screen is displayed.
5
Select [YES], and press the jog dial button (or <SET> button).
The le is saved and the le list is updated.
For details on error messages if an error message is displayed, refer to “Warning/error displays in the thumbnail operation, menu operation, and
USB storage mode” (page 197).
Reading lens les from SD memory card
1
Select [LOAD] in the main menu → [FILE] → [LENS FILE (SD CARD)], and press the jog dial button (or <SET> button).
The list of lens les currently saved in camera memory is displayed.
2
Select the file name to read, and press the jog dial button (or <SET> button).
The conrmation screen is displayed.
3
Select [YES], and press the jog dial button (or <SET> button).
Loading of the le begins.