– 120 –
Chapter 6 Thumbnail Operations for Clips — Thumbnail operations
Modifying recorded clip metadata
Fig. 1 Fig. 2
1
Display the metadata details window for the clip to be modified on the clip properties screen.
2
Place the cursor on the item to be modified using the cursor buttons. (Fig. 1)
The item of the metadata that can be modied is shown as [CREATOR], etc.
3
Press the <SET> button.
Information about keyboard operation is the same as “Checking and modifying uploaded metadata” (page 117).
fThe input window (soft keyboard) for modifying metadata is displayed. (Fig. 2)
fEnter characters with the keyboard to modify the metadata.
4
Press the [OK] button on the keyboard.
The modied metadata is written on the clip and the screen returns to the metadata details window.
@@
NOTE
t To delete each item in [LOCATION] (shooting location data) of [SHOOT], the item cannot be deleted alone. By setting the [ALTITUDE] item to empty,
other [LONGITUDE] and [LATITUDE] items are collectively deleted.
t The metadata for a clip with the incomplete clip indicator [
] cannot be modied. For the clips recorded on multiple P2 cards, modify the metadata
while all P2 cards are inserted.
t Any [MEMO] with 101 characters or more cannot be modied.
P2 card status display
r P2 card status display settings
You can select the P2 card status display from either remaining capacity or used capacity of the P2 card.
1
Press the <THUMBNAIL> button.
The thumbnail screen appears on the viewnder screen.
2
Select either [REMAIN] (remaining capacity) or [USED] (used capacity) in the main menu → [CLIP] → [PROPERTY] → [REMAIN
SETUP].
r P2 card status display items
[REMAIN] Displays remaining capacity on the P2 card as the P2 card status display. (Factory setting)
[USED] Displays used memory capacity on the P2 card as the P2 card status display.