Filter
Top Products
– 42 –
Chapter 3 Recording and Playback — Proxy recording
Recording mode File format Codec Number of channels Bitrate per channel Sampling frequency
[SHQ 2CH MOV] MOV LPCM 2ch 768 bps 48 kHz
[HQ 2CH MOV] MOV AAC-LC 2ch 64 kbps 48 kHz
[HQ 4CH MOV] MOV AAC-LC 4ch 64 kbps 48 kHz
[LOW 2CH MOV] MOV AAC-LC 2ch 64 kbps 48 kHz
Recording the proxy data
Select [P2] or [P2&SD] in the main menu → [REC/PB] → [PROXY SETUP] → [REC MEDIA] and press the <REC> button to start proxy recording at the
same time as recording of the sources.
Push the <MODE CHECK/MENU CANCEL> switch towards the <MCK/MCL> side three times to display the proxy data recording information on the
viewnder screen.
Recording to the SD memory card
To record the proxy data, use SD, SDHC, or SDXC memory cards with an indication of class2 or higher. For the latest information not included in these
Operating Instructions, refer to the support desk at the following website.
http://pro-av.panasonic.net/
When recording the proxy data to an SD memory card, always format the card using the camera.
Checking the SD memory card
1
Insert the SD memory card into the camera.
2
Select the main menu → [FILE] → [SD CARD PROPERTY] (or the main menu → [CLIP] → [PROPERTY] → [SD CARD]).
fThe format status is displayed in [SD STANDARD].
If [NOT SUPPORTED] is displayed, format the card with the camera.
fIn the [PROXY REM] item, check the remaining recording time of the proxy data.
The remaining SD memory card capacity displayed ([PROXY REM]) indicates the remaining proxy recording, but it may differ from the actual
available space. If short recordings are repeated, the available recording time may decrease signicantly compared to the available space. When
the remaining capacity exceeds 999 min, [999min] is displayed.
If the proxy is not recorded to the SD memory card, the remaining time is not displayed.
fIn the [NUMBER OF CLIPS] item, check the number of clips recorded in the SD memory card.
If the number of clips is 1000 or more, no additional proxy data can be recorded to the SD memory card even if there is available capacity.
fShot marks and text memos cannot be added to the clips in the SD memory card,
fDeleting the clips recorded on the P2 card on the thumbnail screen does not delete the proxy data recorded on the SD memory card.
fThe proxy data cannot be recorded to the SD memory card containing data for updating.
@@
NOTE
t While recording to the SD memory card, the remaining capacity can be checked with the mode check on the viewnder screen.
t If proxy data cannot be recorded to the SD memory card even when the main menu → [REC/PB] → [PROXY SETUP] → [REC MEDIA] → [P2&SD]
is set, [SD WR ERR] is displayed. In that case, check the SD memory card. For details, refer to “Error displays about proxy data recordings”
(page 43).
t Data deleted as a result of formatting cannot be restored. Always check the data before formatting.
Formatting SD memory cards
1
Insert the SD memory card into the camera.
2
Select [YES] in the main menu → [FILE] → [FORMAT SD CARD].
This completes formatting the SD memory card.
Proxy data recording time (approximate)
Recording mode Total recording rate
Recording time
(per 1 GB)
STD 2CH MP4 Approx. 1650 kbps Approx. 78 min
SHQ 2CH MOV Approx. 5060 kbps Approx. 25 min
HQ 2CH MOV Approx. 1650 kbps Approx. 78 min
HQ 4CH MOV Approx. 1780 kbps Approx. 72 min
LOW 2CH MOV Approx. 950 kbps Approx. 135 min
(These are reference values for continuous recording with Panasonic products. The recording time may differ depending on the scene or the number of
clips)
Checking the proxy data
fThe [ ] indicator is displayed for the material clips with the proxy data recorded.
fThe detailed information of the recorded proxy data can be viewed in the clip property.
For details on operations, refer to “Checking detailed information of the proxy data” (page 43).
fThe proxy data is recorded to the P2 card or SD memory card as a video/audio le and real-time metadata le.