Filter
Top Products
– 144 –
Chapter 7 Menu Operations — Menu list
[ZEBRA2]
[ON] [OFF] [SPOT]
[109%]
[ZEBRA2 DETECT]
[ZEBRA1 DETECT]
[0%]
[VF MARKER]
Item Description of settings Remark
[TABLE]
Selects the setting table of the marker select function. Check or set the details of
[A]/[B] at subsequent settings.
[A], [B]
[CENTER MARK] Controls the center mark.
[1]
+ (large)
[2] Open center (large)
[3]
+ (small)
[4] Open center (small)
[OFF] Does not display.
[SAFETY MARK] Selects the type of frame for the safety zone marker.
[1] Box
[2] Corners
[OFF] Does not display.
[SAFETY AREA]
Sets the size of the safety zone marker.
The constant ratio of length to width can be set in 1% increments.
[80%]…[90%]…[100%]
[FRAME MARK]
Selects frame marker [ON]/[OFF].
[ON], [OFF]
[FRAME SIG]
Sets frame marker aspect ratio.
The [VISTA] is 16:8,65 (1,85:1), and [CNSCO] is 16:6,81 (2,35:1).
[4:3], [13:9], [14:9], [VISTA], [CNSCO]
[FRAME LVL] Sets the level of the outside of the frame marker.
[0] Equivalent to signal off (blanking status).
[1]…[14] Higher numbers indicate increased brightness.
[15] Same brightness as center.
are factory settings.
[VF USER BOX]
The user box can be displayed as a box-type cursor in any position.
Item Description of settings Remark
[USER BOX]
Sets whether to display the user box in the viewnder.
[ON], [OFF]
[USER BOX WIDTH]
Sets the width of the user box.
[1]…[13]…[100]
[USER BOX HEIGHT]
Sets the height of the user box.
[1]…[13]…[100]
[USER BOX H POS]
Sets the horizontal position of the center of the user box.
[−50]…[0]…[50]
[USER BOX V POS]
Sets the vertical position of the center of the user box.
[−50]…[0]…[50]
are factory settings.