Filter
Top Products
106
The underlining in the variable range column indicates the setting in
the preset mode.
Setting menu screens FILM (CAM) MAIN MENU 2 (continued)
SUPER GAIN screen
The gain allocated to the SUPER GAIN switch is set
on this screen.
Item
Variable
range
Remarks
S. GAIN VALUE 18dB
24dB
30dB
36dB
VF
display
USER
ENG
For selecting the gain
when the SUPER GAIN
switch is pressed.
FRAME MODE screen
The frame rate is set on this screen.
Item
Variable
range
Remarks
FRAME RATE
RANGE
60-12
60-4
VF
display
USER
ENG
For selecting the variable
range of the frame rate.
60-12:
60 fps to 12 fps
60-4:
60 fps to 4 fps
FRAME RATE
(CAM MENU)
(FILM MENU)
60
:
24
:
4
USER
ENG
For setting the frame rate.
<Note>
When “60-12” has been
selected as the FRAME
RATE RANGE setting, the
frame rate cannot be set to
11 fps or below.
SCAN REVERSE ON
OFF
USER
ENG
This function is for
correcting the images
when the prime lens is
used.
ON :
The images are
corrected (by
reversing their top
and bottom and their
left and right).
OFF
: The images are not
corrected.
SCUFE
SCUFE
SCUFE
SCUFE
SCUFE
USER SW
FRAME RATE
60
:
24
:
12
USER
ENG
For setting the frame rate
to be allocated to the
USER1 or USER2 button.
Using the USER1 or USER2 button to switch the
frame rate
OOnce the desired frame rate has been set in a
USER (USER1 or USER2) button by performing
menu operations, subjects can be shot at the set
frame rate simply by pressing the USER button.
The original frame rate is restored when the USER
button is pressed again.
OWhile recording is in progress, the frame rate will
not be switched even when the USER button is
pressed.
OWhen the frame rate has been switched using the
USER button, the switched rate will not take effect
even if one of the synchro scan switches (“+” or “– ”)
is pressed after the JOG dial button is pressed.